|
Our Wearlon®
Anti-Graffiti Coatings can protect just about any surface from graffiti
vandals...
Wearlon PM4545.76AG:
An epoxy-silicone, three component,
waterbased, room temperature cure coating. The Wearlon coating with its slick
surface resists spray paint, marker, pen, pencil, blood and most stain causing
products thereby deterring the vandal. Clean the Wearlon surface with soap and
water or mild house hold detergent and a nylon brush, unlike other
anti-graffiti coatings that require harsh toxic solvents such as M.E.K....
(methyl ethyl keytone). Following are some important features about Wearlon
that set it apart from all the rest ...
- Non-Toxic
- Low V.O.C....
- Durable
- Excellent Hiding Properties
- Easily Applied Via Spray or Roller
- Easy Clean Without Harsh Solvents
- Single Coat Application By Spray
- Standard Color - Ivory. Available in a variety of colors to
match your application.
Wearlon 711/722 CLEAR Anti-Graffiti
Coating:
Wearlon 722 Base Coat and Wearlon 711 Waterborne Acrylic
Polyester Emulsion is a two component system. This system is transparent, UV
resistant and extremely hard.
Most graffitied surfaces may be wiped clean with a damp
sponge. For surfaces that have been spray painted or permanent markered,
Wearlon suggests using a mild alkali detergent while scrubbing with a nylon
bristle brush. Conventional household cleaners are also quite effective at
removing stains.
For large areas, a power brush spray system with a diluted
alcohol water solution or mild conventional paint thinners such as mineral
spirits is recommended.
|
